User's Manual

E272 - 2.4GHz Cordless
2 INSTALLING THE E272
INSTALL THE BATTERIES
Use this procedure to install or replace the batteries in the
telephone. Be sure to follow the battery specifications and
safety instructions. See “SAFETY INSTRUCTIONS” on page
iv.
CAUTION
To reduce the risk of fire, use only Cidco part number
D-AA1000X3 3.6V, Nickel Cadmium (Ni-Cad) telephone
battery pack rated at 3.6V 1000 mAh. For replacement
battery pack, use only RadioShack® part number
23-962 , Nickel Cadmium (Ni-Cad) telephone battery
pack rated at 3.6V 700 mAh.
Radio Shack is a registered trade mark of Tandy Corporation.
HANDSET BATTERY
a. Press down on the battery cover and slide
the cover down to expose the battery
compartment.
b. Locate the battery “+” and “-” signs inside the
battery compartment and the corresponding
“+” and “-” on the battery pack. Align the
battery pack “+” and “-” with the “+” and “-” in
the battery compartment and press down.
c. To replace the battery cover, slide the cover
upwards until the tab engages and the cover
snaps into place.
NEED TO KNOW
Prior to first use, place the handset in the cradle
and charge the batteries for at least 12 hours
before connecting the telephone line. The
charge lights on the base come on and indicate
that the handset and spare are charging.