User's Manual

D936/D937 - 900MHz Cordless
14 USING THE D936/D937
USING HOLD
You can place a call on hold by pressing the HOLD key
(handset or base). The talk /end and speaker (base) lights
flash slowly while calls are on hold.
There are three ways to take a call off hold:
■ Press TAL K / E ND or SPEAKER (handset or base) to
resume the call.
■ Pick up the call on another extension.
■ The caller hangs up.
USING MUTE
You can block your side of the conversation when you are
using the phone by pressing the MUTE key. Mute is availab le
on both the handset and base.
HANDSET
■ Press the MUTE key to turn ON.
■ CALL MUTED is displayed on the handset.
■ Press the MUTE key or hang up to turn OFF.
BASE
■ Press the MUTE key to turn ON.
■ The mute light on the base flashes.
■ Press the MUTE key or hang up to turn OFF.
USING NETWORK SERVICES
Your D936/D937 is programmed so you can easily use all
of the convenient network services you subscribe to through
your local telephone company. To use any of these features,
press MENU / EXIT. The arrow is next to
NETWORK SERVS.
Press SELECT (or press 1).
For a list of the features that are programmed into your
phone, please refer to your Quick Start insert.
a. Press the  REVIEW  key to scroll through
the features until the desired feature is
displayed.
b. Press the TAL K / END or SPEAKER (handset) key to
activate the feature.
NEED TO KNOW
If you would like to have access to a feature that you do
not currently subscribe to, please contact your local
telephone company.
USING THE INTERCOM
The intercom feature allows you to conduct a conversation
between the base and the handset when the phone is in idle
mode or when you are on a call.
IDLE MODE
To activate, press MENU / EXIT and select 2 for INTERCOM.
INTERCOM ACTIVE is displayed. The base beeps twice to
indicate intercom is active. To deactivate, press
TALK / END (handset) or SPEAKER (base).
D936-937.book Page 14 Friday, August 30, 2002 10:24 AM