User's Manual

D936/D937 - 900MHz Cordless
12 USING THE D936/D937
USING THE D936/D937
ANSWERING CALLS
You can answer a call three ways:
■ Press TA LK / E N D (handset).
■ Press SPEAKER (handset or base).
■ Press FLASH (handset or base) to answer Call
Waiting calls.
DIALING
a. Press TALK / EN D (handset) or SPEAKER
(handset or base).
b. Use the keypad to dial the phone number.
PRE-DIALING
Pre-dialing allows you to enter the number and verify it
before placing the call.
a. Use the handset keypad to enter a telephone
number.
b. Check the number on the display. If the number is
wrong, press DELETE to delete the entry digit-by-
digit.
c. When the correct number is displayed, press
TAL K / EN D or SPEAKER (handset) to place the call.
LAST NUMBER REDIAL
To automatically redial the last number dialed, press
REDIAL / P (handset) or REDIAL (base).
ADJUSTING THE VOLUME
HANDSET
a. Press TALK / EN D (handset).
b. Press the  or  VOLUME key on the side of the
handset while the phone is in use to decrease or
increase the volume. There are four volume levels.
HANDSET RINGER
a. Press the  or  VOLUME key on the side of
the handset while the phone is not in use.
b. The handset will ring. Press the  or  VOLUME key
to decrease or increase the ringer volume until the
desired ring level is obtained. There are four
different levels of ring (off, low, medium and high).
HANDSET SPEAKER
a. Press the handset SPEAKER key.
b. Press the  or  VOLUME key on the side of the
handset while the phone is in use to decrease or
increase the speaker/intercom volume. There are
four volume levels.
D936-937.book Page 12 Friday, August 30, 2002 10:24 AM