User's Manual

D936/D937 - 900MHz Cordless
INSTALLING THE D936/D937 3
SPARE BATTERY (OPTIONAL)
When the spare battery is charged in the base, it provides
operational backup during a power failure (the handset will
continue to operate).
NEED TO KNOW
Install the spare battery after plugging in the adapter.
a. Place the spare battery pack in the charger by
pressing the battery door release and removing the
cover.
b. Align the battery pack “+” and “-” signs with the “+”
and “-” in the battery compartment and press into
place.
c. Replace the cover and verify the spare charge LED is
lit.
INSTALL THE TELEPHONE LINE CORD AND
DESKTOP/WALL MOUNT WEDGE
You can set your D936/D937 on a tabletop or mount the
phone on a wall.
TO USE ON A TABLETOP OR DESK
a. Place the
wedge over the
upper portion of
the base so the
arrow points
away from the
phone. Install the
wedge by
aligning it over
the holes and
pressing down
and in the
opposite
direction of the
arrow until it
snaps into place.
b. Plug the long line cord into the phone jack marked
TEL LINE.
c. Plug the other end of the line cord into the wall jack.
CAUTION:
To reduce risk of
fire, replace only
with the same
type battery
listed in the
User Manual.
!
Spare Battery
Battery Door
Charger
Release
Tabletop Mounting
D936-937.book Page 3 Friday, August 30, 2002 10:24 AM