User's Manual

D933 - 900MHz Cordless
USING THE D933 18
Optional Method for Creating a New Record
a. From the idle screen, enter the phone
number.
b. Press the SAVE key. Enter or edit the name.
- Use the number key pad to enter in characters.
Entering Alphanumeric Characters
Each number is assigned a set of letters. Press the
corresponding number until the desired letter is displayed.
For Example: to enter JOHN: press 5 once; press 6 three
times; press 4 two times. Finally, press 6 two times. If the
next desired letter is on the same key as the current letter,
press the  REVIEW key to move to the next position. To
enter a blank space, press  REVIEW.
Special Symbols
When you edit a name, you can also use the * and # keys to
select the following symbols in the name field:
Adding Special Characters
You can add special characters by:
■ Press the  REVIEW key to add a space in the name
field.
The phone dials the number exactly as it is stored in the
directory.
DELETING DIRECTORY RECORDS
Deleting an Individual Directory Record
a. Press DIR ().
b. Use the  REVIEW  key or look up
alphabetically (see “Looking up Records in the
Directory” on page 16) to locate the record
you want to delete.
c. Press DELETE. The following is displayed.
DELETE?
1=YES 2=NO
d. Press 1 to delete or press the DELETE key
again.
e.
DELETED is displayed.
Deleting All Directory Records
a. Press DIR ().
b. Use the  REVIEW  key to locate any
record.
c. Press and hold DELETE. The following is
displayed.
DELETE ALL?
1=YES 2=NO
d. Press 1 to delete all or press the DELETE
key again.
e.
50 AVAILABLE is displayed.
*/@&‘ (),-.#