User's Manual

D933 - 900MHz Cordless
USING THE D933 12
USING THE D933
ANSWERING CALLS
You can answer a call two ways:
■ Press TA LK .
■ Press FLASH to answer Call Waiting calls.
USING VOICEMAIL
If you subscribe to your local telephone company’s Voicemail
Service, you can use your VOICEMAIL key to automatically
access your mailbox. (To setup your Voicemail, see “Vmail
Setup” on page 10.)
When your VOICEMAIL light flashes, or you see the screen
display
MESSAGE WAITING, press the VOICEMAIL key to
access your Voicemail.
CLEARING THE VOICEMAIL LIGHT
The Voicemail light may remain on after reviewing your
messages remotely even when there are no messages. To
clear the light, press EXIT / MENU and then press 5 for
CLEAR VM LITE to turn the light off. VOICE MAIL LIGHT
CLEARED
is displayed.
USING CALL WAITING ID (CWID) OPTIONS
When a new call comes in while you are talking, you will hear
a tone. The new caller’s name and phone number, if
available, will be displayed. You can either alternate between
calls or disposition the call. Feature may not be available in
all areas. Contact your local phone company.
NEED TO KNOW
Caller ID, Call Waiting ID and CWID Options are
required from your local telephone company
.
Please contact your local telephone company to
activate these services.
ALTERNATING BETWEEN CALLS
When you receive a Call Waiting call and want to connect,
press FLASH. The active call will be placed on hold and the
new call will be active.
■ Press FLASH to alternate between calls.
■ Press TA LK to end the call.
DISPOSITIONING CALLS
If you subscribe to Call Waiting ID options and Show Options
is set to On; when you hear the Call Waiting tone, you can
apply a disposition to the call.
■ Press one of the 5 digits listed below to go directly to
the corresponding option.
■ Follow the on screen prompts, when displayed, to
finish dispositioning the call.