User's Manual

D933 - 900MHz Cordless
11 FEATURES AND CONTROLS
-VMAIL SETUP-
ENTER PASSWORD
AND # IF NEEDED
Enter your password then press SAVE. If you normally press
a # after entering your password, add it to the end of your
password here too.
SELECTING A DIALING METHOD
The D933 dials in either tone or pulse/rotary mode. To
select the dialing method, press EXIT / MENU. Using the
 REVIEW  key, scroll through the options until the arrow
is next to
DIAL METHOD and press SELECT (or press 4).
- DIAL METHOD -
1 = TONE
2 = PULSE
CURRENTLY TONE
Press the number for the desired dialing method or press
EXIT / MENU to leave as is.
CLEAR VOICEMAIL LIGHT
To clear the voicemail light, press EXIT / MENU. Using the
 REVIEW  key, scroll through the options until the arrow
is next to
CLEAR VM LIGHT and press SELECT (or press
5). See “Clearing the Voicemail Light” on page 12.
CALL WAITING ID OPTIONS SETUP
Call Waiting ID options allow you to disposition incoming calls
when you are on another call. Feature may not be available
in all areas. Contact your local phone company.
NEED TO KNOW
Caller ID, Call Waiting ID and Call Waiting ID
(CWID) options are required from your local
telephone company. Please contact your local
telephone company to activate these services.
NEED TO KNOW
When the Show Options is set to “Yes”, Call
Waiting ID options is on. When it is set to “No”,
Call Waiting ID is off.
To turn Call Waiting ID options on/off, press EXIT / MENU.
Using the  REVIEW  key, scroll through the options until
the arrow is next to
CALL WAIT ID and press SELECT (or
press 6).
-CALL WAITING-
SHOW OPTIONS
1 = YES
2 = NO
CURRENTLY NO
Press the number for the desired option or press
EXIT / MENU to leave as is.