User's Manual

D933 - 900MHz Cordless
INSTALLING THE D933 4
INSTALL THE TELEPHONE LINE CORD AND
DESKTOP/WALL MOUNT WEDGE
You can set your D933 on a tabletop or mount the phone
on a wall.
TO USE ON A TABLETOP OR DESK
a. Place the wedge
over the upper
portion of the base
so the arrow points
away from the
phone. Install the
wedge by aligning it
over the holes and
pressing down and
in the opposite
direction of the
arrow until it snaps
into place.
b. Plug the long line
cord into the phone
jack marked TEL
LINE.
c. Plug the other end of the line cord into the wall
jack.
TO MOUNT ON A WALL
a. Place the wedge
over the lower
portion of the base
so the arrow points
away from the
phone. Install the
wedge by aligning it
over the holes and
pressing down and
in the opposite
direction of the
arrow until it snaps
into place.
b. Plug the short line
cord into the phone
jack marked TEL
LINE.
c. Thread the phone cord through the open
channel in the base.
d. Plug the other end of the phone cord into the
wall phone jack.
e. Use the gap on the underside of the base to
gather any excess cord.
f. Hang the base over the installation hooks (wall
plate not supplied).
Tabletop Mounting
Wall Mounting