User's Manual

D933 - 900MHz Cordless

3 INSTALLING THE D933

CHOOSE A LOCATION FOR THE BASE UNIT

The base should be away from all other electronic equipment

such as a personal computer, microwave, stereo, or

television. It is also a good idea to place the unit away from

noisy areas, or from heat sources such as a radiator or

direct sunlight.

PLUG IN THE ADAPTER

a. Plug the AC adapter tip into the DC 9V jack on

the base and the other end into an electrical

outlet. Be sure that the tip is securely

plugged into the jack. Without AC power your

phone will not operate.

CAUTION

You must use a Class 2 power adapter that supplies

9 Volts DC and delivers at least 500mA. Its center

tip must be set to positive and its plug must fit the

phone’s DC 9V jack. The supplied adapter meets

these specifications. Using an adapter that does not

meet these specifications could damage the phone

or the adapter.

b. Thread the cord through the clip on the

housing to prevent the cord from pulling

loose. Be sure that the wall outlet is not

controlled by a light switch.

DC 9V

LINE