User Manual

18
TIMING CALLS
When you call someone, the clock on your display changes to a call timer. The timer
counts the entire length of the time you are on the phone. When the timer goes
past 99 minutes and 59 seconds, it starts over.
GETTING TEMPORARY TONE SERVICE
If you do not have Tone service in your area, you need to change the TONE/PULSE
during the programming mode. Please see Step 2. Select Between Easy or Detailed
Setup on page 7.
Whenever you need Tone service for interacting with bank and other automated
services, you can temporarily override your setting to Tone.
Press
* during the call and the phone switches to temporary Tone service for the
duration of the call. The phone returns to Pulse service when you hang up.
GOING OUT OF RANGE
Your CL940 handset is connected to its base through radio technology. It is possible
for the handset to be too far away from the base. If the handset is too far from the
base, you might have problems talking to your caller. Simply, walk back towards
the base until you are no longer out of range.
LOCATING A LOST HANDSET
Should you misplace your handset, you can locate it quickly and easily by pressing
the PAGE/FIND key on the base. The handset beeps for 15 seconds, or until you ei-
ther press a key on the handset or press the PAGE/FIND key again. If the handset
does not beep, it is either turned off, out of range, or the battery needs recharging.
CL940SwbRevAFinal.book Page 18 Thursday, August 19, 1999 5:45 PM