User Manual

9
DETAILED SETUP
1. SELECT BETWEEN TONE AND PULSE
If you are using the detailed setup method, you next see the dialing method screen.
The CL940 can dial in either tone or pulse/rotary mode.
❑ Press F REVIEW to select TONE.
❑ Press REVIEW E to select PULSE.
2. ANSWER PHONE WHEN PICKED UP
There are two ways that the CL940 can answer a call. The CL940 can automatically
answer incoming calls when you remove it from the cradle, or the phone can be set
to manually answer after pressing the TALK key.
❑ Press F REVIEW to choose to automatically answer incoming calls when
removed from the cradle.
❑ Press REVIEW E to choose to press TALK before answering incoming
calls.
3. CREATE OR CHANGE CALLNOTES SETUP
This series of prompts allow CallNotes subscribers to set up or change the CallNotes
key.
❑ Press F REVIEW
to choose YES, to see other screens that allow you to
create or change your CallNotes access number and passcode.
❑ Press REVIEW E to choose NO, if either you do not subscribe to this
service, or you do not want to create or change CallNotes settings.
If you
select this setting, skip to Set Up or Change Caller ID Settings on page 10.
Turn Voice Mail On or Off
If you choose to set SETUP VOICE MAIL to NO, this screen does not appear.
If you subscribe to CallNotes from Southwestern Bell, ensure that this setting is set
to ON. Programming this feature does not provide or cancel services. You must
contact your Southwestern Bell Messaging Services representative to request a
change in services.
❑ Press F REVIEW
to choose ON, which indicates that you subscribe to
the service. Continue with Enter Your CallNotes Access Number below.
❑ Press REVIEW E to choose OFF, which indicates that you do not
subscribe to the service. If you choose to set VOICE MAIL to OFF, skip to
Set Up or Change Caller ID Settings, on page 10.
CL940SwbRevAFinal.book Page 9 Thursday, August 19, 1999 5:45 PM