User's Manual

PERSONALIZING YOUR PHONE
10
only. This selection remains in effect while adding your remaining local
area codes.
● Press 1 to select SEVEN digits.
● Press 2 to select TEN digits.
You can add up to 10 local area codes. Press REVIEW E when you are
finished.
5. SELECT DIALING METHOD
● Press 1 to select TONE.
● Press 2 to select PULSE.
6. SELECT RING SOUND
You can choose from one of ten different ringing sounds. Use the keypad
to choose a number between 0 and 9 to select from one of the ten
sounds. You can continue to experiment with different ring sounds. The
phone retains your latest setting. Press REVIEW E
to enter the number
when you are finished.
7. NEW CALL LIGHT
You can choose to have the red light on the top of the handset flash when
a call has been received and logged as a Caller ID record.
● Press 1 to select ON.
● Press 2 to select OFF.
8. ANSWER ON PICKUP
There are two ways that you can answer a call. The telephone can
automatically answer incoming calls when you remove the handset from
the cradle, or the phone can be set to answer only after pressing the
TALK key.
● Press 1 to choose to automatically answer incoming calls when
the handset is removed from the cradle.
● Press 2 to choose to press TALK before answering incoming
calls.
SuperManual.book Page 10 Thursday, August 19, 1999 12:50 PM