User's Manual

5. Plug the other end of the line cord into the wall jack.

6. Use the gap on the underside of the base to gather any excess cord.

7. Hang the base over the installation hooks.

4. INSERT THE BATTERY INTO THE HANDSET

Use this procedure to install or to replace a battery.

Be sure you follow the battery specifications and

safety instructions outlined in your safety instruc-

tion booklet.

! CAUTION

Use only nickel cadmium (Ni-Cad) batteries in this

phone.

1. Press down on the battery cover and slide the

cover down to expose the battery

compartment.

2. Locate the battery terminals inside of the

battery compartment and the corresponding

terminals on the battery pack. If you are

replacing a dead battery, first remove the old

battery pack.

3. Align the pack’s terminals with the terminals in the battery well.

4. Replace the battery door.

5. CHARGE THE HANDSET

Before you use the phone for the first time:

1. Ensure the handset is turned off.

2. Place the handset in the cradle and charge the battery for at least 12 hrs.

The charge light on the base comes on to tell you that the handset is

charging.

Whenever you see the RECHARGE BATTERY message,

you need to recharge your handset by placing the

handset in the cradle.

RECHARGE BATTERY

DIR

10/315:55

408-555-1234

CALL

IN USE 1 2

CALLERS

SEND TO VM