User's Manual

To add a flash—Press and release the FLASH key. The letter F shows on the dis-

play to indicate a flash.

Reprogramming Handset EasyOptions Keys

When no digits are showing in the display, you can pre-dial from the handset.

1. Use the keypad to enter the telephone number you wish to save.

If the number is wrong, press DELETE twice to erase the entire

number, or use the F REVIEW key to delete the last digit.

2. Press and hold one of the four handset EasyOptions keys until the NUMBER

STORED message displays.

3. To automatically dial this stored number press the EasyOptions key.

USING FLASH

The FLASH key allows you to switch between calls, if you subscribe to Call Waiting.

ADJUSTING THE VOLUME

Adjusting the Handset Volume

1. Press TALK.

2. Press the G or H key on the side of the handset to increase or decrease the

volume. The handset sounds an error tone when it reaches the upper or lower

limits.

Adjusting the Handset Ringer Volume

Press the G or H key on the handset while the phone is not in use. You hear the

sound of the ringer as you adjust the volume between the two levels.

USING HOLD

You can place a call on hold by pressing the HOLD key on the handset. The Talk LED

flash slowly while calls are on hold.

To take a call off hold, you can:

❑ Press TALK.

❑ Pick up the call on another extension.

CL940SwbRevAFinal.book Page 17 Thursday, August 19, 1999 5:45 PM