User's Manual

10
Enter Your CallNotes Access Number–Your access number is the telephone
number you dial to get to CallNotes. This screen prompts you to use the dialing
keypad to enter your access number. Press REVIEW E to enter the number when
you are finished.
If you make a mistake, use F REVIEW to erase a digit.
Enter How Many Pauses–The CL940 telephone allows you to enter multiple
pauses, or intervals between the access number and the CallNotes passcode. These
pauses allow the CallNotes system time to ring and answer before submitting your
passcode. Each pause is three seconds long. The default is two pauses (six seconds
total).
Enter Your CallNotes Passcode–This screen prompts you to use the dialing keypad
to enter your CallNotes passcode. Your passcode can be from 4 to 10 digits.
You can enter up to 32 characters and/or digits total for these three fields. You can
also add any necessary
# keys or flashes.
If you make a mistake, use F REVIEW to erase a digit.
4. SET UP OR CHANGE CALLER ID SETTINGS
This series of prompts allow Caller ID and Call Waiting ID subscribers to set up or
change their settings.
❑ Press F REVIEW
to choose YES. You then see other screens that allow
you to create or change Caller ID and Call Waiting ID settings.
❑ Press REVIEW E
to choose NO, if either you do not subscribe to either of
these services, or you do not want to create or change Caller ID and Call
Waiting ID settings. If you select this setting, go to Set Up or Change Area
Codes on page 12.
Turn Caller ID On or Off–Most people want to see Caller ID data. But if you live in an
area that does not yet support Caller ID, or do not subscribe to the service, you
might want to turn off this setting.
❑ Press F REVIEW to turn on or enable Caller ID.
❑ Press REVIEW E to turn off Caller ID.
Programming this feature does not provide or cancel services. You must contact a
Southwestern Bell representative to request a change in services.
Turn the New Call Light On or Off –The next screen asks Caller ID/Call Waiting ID
customers if they want the new call light on the back of the handset to flash after
receiving a new call.
❑ Press F REVIEW if you have Caller ID and you want to see the call light.
❑ Press REVIEW E if you don’t subscribe to Caller ID or if you want to turn
off the call light permanently.
CL940SwbRevAFinal.book Page 10 Thursday, August 19, 1999 5:45 PM