User's Manual

INSTALLATION
9
HEADSET
The headset jack is located on the side of the handset and is a standard
2.5mm plug. Simply plug the headset into the jack and the headset will
be active.
NOTE
When the headset is plugged into the telephone, the
microphone and earpiece on the handset are not active.
BELT CLIP
You can use the belt clip to hang the handset from your belt.
1. Place the belt clip on the back of the handset.
2. Align the tabs on the belt clip with the slots on the handset.
3. Press the belt clip to the handset to snap the tabs into the slots.
4. Make sure both tabs are securely snapped into the handset slots.
CL915.book Page 9 Friday, May 4, 2001 11:35 AM