Operation Manual

|
5
Chapter 2 – how to use your Cm 9.3a (+)
Here you will learn how to use the upper and lower display parts in bike mode.
2.1 Overview
2.2 Key operation in normal “Bike mode”
1 With the left button you can navigate through the main functions in the lower display.
2 With the middle button you can navigate through the sub functions in the lower display.
3 With the right button you can navigate through the upper display.
2.3 Status icons
TOT = Total value of the active bike mode
ΣTOT = Total value of both active bike modes
Ø = Average value
MAX = Maximum value achieved
MIN = Lowest value achieved
% = Percent
= Values ascending
= Values descending
2.4 Display control
2.4.1 Upper display control
Time riding time heart rate
Altitude daily distance Power in watt
2.4.2 Lower display control
Functions in bold are main functions.
Functions with need to be activated in the menu (Chapter 3).
Time Date
Riding time TOT Σ TOT
Cadence Ø MAX
Heart rate Ø MAX Time below the lower HR limit Time between the lower and upper HR Limit
Time above the upper HR limit
Kilocalories Fat burning in % TOT kcal
Daily distance TOT Σ TOT
Altitude Altitude Altitude MAX TOT TOT Σ TOT
Slope in % Slope in Ø Slope in Ø Slope MAX Slope MAX
Climb rate / fall rate in m per hour Ø m/h Ø m/h MAX MAX
Average speed MAX speed
Temperature MIN MAX
Power in watt Ø MAX *
Power for left and right foot
*If you don’t have a power measurement system, you can activate this function to obtain a power calculation.
Please note that his value is just an estimate and not a precise value.
321