02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 2 PACKAGE CONTENTS 1. 2. 3. 4. 5. 6. 7. 8.
02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 4 Congratulations on your purchase! With the CICLOMASTER CM 628 you have acquired a radio-controlled electronic bike computer with heart rate measuring and with the highest level of precision and novel digital transmission technology. It possesses stateof-the-art electronics, is waterproof and has a durable and long service life.
02 CM 628 englisch 34-65 19.05.2005 1. GENERAL INFORMATION Warning: whoever carries out sport should have a general medical check up on his/her general state of health especially beginners, persons older than 35 years of age and anyone who has suffered from illnesses or injuries in the past. It is recommended that a doctor be consulted in any case in the presence of risk factors, such as smoking, high blood pressure, high cholesterol values, diabetes, lack of exercise and excess weight.
02 CM 628 englisch 34-65 19.05.2005 magnet. Turn the max. 3 mm transmitter so that the separation distance between transmitter and magnet is not more than 3 mm. To check for correct installation, rotate wheel a few times and check whether the computer receives a signal. 2.3 Installing the cadence transmitter Attach cadence transmitter to a strut opposite the pedal crank with the aid of the O-ring. Hang the O-ring on one side of the transmitter, wrap around the strut and hook back on the opposite side.
02 CM 628 englisch 34-65 19.05.2005 Caution: Whilst not in use, or during transportation of the CM 628 e.g. in the car, the CM 628 should not remain on the handlebar bracket. Small movements will activate the movement sensor and start the transmitter search, which is a very demanding function on the battery, e.g.
02 CM 628 englisch 34-65 19.05.2005 Measurement of the wheel circumference (U) (for more precise adjustment): ▲ R ▲ Make a marker on the front tire and on the floor (e.g. with chalk). Move the bike straight ahead by exactly one tire rotation (for a more precise measurement ensure tire pressures are correct and be seated on the bike) and mark the location on the floor.
02 CM 628 englisch 34-65 19.05.2005 Before the transmitter search, allow the magnet to pass in front of the speed transmitter once (1 wheel rotation). This will start the Transmitter and emit a signal for approx. 3 minutes. Start the transmitter search in the CM 628 by pressing both buttons for a short time. A percentage value runs up in the display during the initialisation (see Fig.
02 CM 628 englisch 34-65 19.05.2005 Start the transmitter search in the CM 628 by pressing both buttons for a short time. A percentage value runs up in the display during the initialisation. In case of successful initialisation, the CM 628 changes automatically into the normal operating mode and the indication SPD/AV appears in the display. In case of unsuccessful initialisation, the transmitter search can be started again by repeated short pressing of both buttons.
02 CM 628 englisch 34-65 19.05.2005 Here you set your personal fitness level, necessary for the CICLOI nZone®-calculation. Sex Set with right button, save and continue with left button. Change between m = male and f = female. The sex is needed for the CICLOI nZone®-calculation and the calorie consumption. Weight Adjust with right and left button (save and continue with left button) Range 20 – 299 kg The actual weight is needed for the CICLOI nZone®-calculation and the calorie consumption.
02 CM 628 englisch 34-65 19.05.2005 5. FUNCTIONS The individual primary functions can be called up by short pressing of the right or left button, one after each other. Through pressing the right button for 3 sec., the first subfunction is called up in each case and, through subsequent short pressing of the right button, further sub-functions appear. In travel operating mode, the instantaneous speed is displayed simultaneously with all functions above in the display.
02 CM 628 englisch 34-65 19.05.2005 the display). Range: 0 - 999.99 km or 624.99 miles 2. Total kilometers Sub-function of the function daily kilometers. Display of the total kilometers travelled up to now. Range: 0 - 99999 km or 62499 miles 3. Sum of the total kilometers (Bike 1 + Bike 2) Sub-function of the function daily kilometers. This indicates the total kilometer sum travelled up to now by Bike 1 and Bike 2.
02 CM 628 englisch 34-65 19.05.2005 Seite 24 Average speed (AV) Indicates the average speed. Range: 0 - 999 km/h or 624 mph (dependent on the wheel circumference adjusted) Time Indicates the current time. Range: 00:00 - 23:59 or 00:00 12:00 AM/PM (a "P" is placed before the time in case of PM) If no heart rate transmitter has yet been initialised, the initialisation display is indicated instead of the next function (see adjusting mode Chap. 4.6). Sub-function: 1.
02 CM 628 englisch 34-65 19.05.2005 5. Training time below the lower limit set for heart rate Sub-function of the heart rate measurement function. Displays the training time during which heart rate dropped below the lower limit set. 6. Total calorie Indicates the total calorie consumption. Total calories can be set to zero only by pressing AC-button on the reverse side for 3 sec.(caution: this causes a total reset of the CM 628, that means all values and settings are set to zero or the default value).
02 CM 628 englisch 34-65 19.05.2005 the correct aim to follow in their training. But how do you train to achieve those aims in the most efficient possible manner? How do you find the right intensity of effort during the training? CICLOI nZone® is the optimum training ZONE for effort, resistance and weight loss. What does CICLOI nZone® do? It calculates the optimum training zone for effort, resistance and weight loss.
02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 30 Initialization runs only very slowly and is then interrupted with 'Error' • Transmitter battery empty or transmitter defective • Transmitter is already initialised for other bike. If, in spite of this, the transmitter should be initialised for this bike, a total reset must be made (press AC button for 3 sec.), so that the already existing initialisation is deleted.
02 CM 628 englisch 34-65 19.05.2005 Operating temperature: -10°C to 50°C Average battery life: 5 years (based on average use of 1 hour per day) Transmission frequency: 868 MHz 10:23 Uhr Seite 32 13.
