User Manual

Installation

3) Install the air outlet assembly on the circular air outlet at the back

of the range hood;

4) Align the air ventilation port of the range hood with the cabinet

ventilation hole at the bottom, pass the power cord through the

power hole, and then use four 0.16"*1.18" screws to lock into the

corresponding position of the pencil marked in the cabinet to fix

the range hood.

NOTE:

⚫ The extensible pipe are optional accessory, not supplied.

⚫ Connect ductwork to hood and use metal foil duct tape to make

joints secure and air-tight.

⚫ Make sure the damper assembly (or round duct plate) enters the

ductwork and that the damper opens and closes freely.