User`s manual

63
Days with recorded video display on the calendar with white numbers. You can highlight the
days with recorded video by using the arrow buttons. Once you have highlighted a day, press the
button to select it.
A time bar will display at the bottom of the calendar. Hours in which video was recorded will be
highlighted. You can use Up and Down arrow buttons to highlight the time bar. Once the time
bar is highlighted, you can select the time by using the Left and Right arrow buttons.
NOTE: The time bar is in one-hour segments. If a segment is highlighted, it means that
some video was recorded during that hour. However, it does NOT mean video was
recorded for the entire hour.
Once you have set the date and time you want to search, highlight the GO button and press the
button. The selected date and time will display. The PLAY/PAUSE, RW, FF, Jog and Shuttle
can now be used to review the surrounding video.
Event Search
Figure 68 — Event Log screen.
The DVR maintains a log of each time the Alarm Input port is activated. The Event Search
screen displays this list. Use the arrow buttons to highlight the event for which you would like to
see video.
Pressing the
button will extract the event video and display the first image of the event.
Pressing the
PLAY/PAUSE button will start playing the “event” video segment. Pressing STOP
returns to live monitoring. Pressing SEARCH returns to the Event Log.
You can also narrow your event search by selecting the Query… button and setting up the new
search condition.