User`s manual

TVDR4 – 9 – 16H
6
Connecting the Monitor
Figure 6 — Video Out connectors.
Connect the monitor to either the Video Out or SVHS Out connector.
NOTE: If your monitor has an SVHS input, use it because it will give you better quality
video display.
NOTE: The Video Out (BNC) and the SVHS Out connectors may be connected to
individual monitors for simultaneous operation.
Connecting Audio
NOTE: It is the user’s responsibility to determine if local laws and regulations permit
recording audio.
Figure 7 — Audio In and Out connectors.
Your DVR can record audio. Connect the audio source to Audio In. Connect Audio Out to your
amplifier.
NOTE: The DVR does not have amplified audio output, so you will need a speaker with an
amplifier. The audio input can be from an amplified source or directly from a microphone.
Connecting Alarms
Figure 8 — Alarm Input connector strips.