User`s manual

TVDR4 – 9 – 16H

CAUTION: Write the password down and keep it in a safe place. Once the

password has been reset, the default will no longer work. If the password is

forgotten, the unit must be reset using the Factory Reset Button and all data

settings will be lost.

LAN Setup Screen

Figure 56 — LAN Setup screen.

NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from

your network administrator.

Change the numbers by highlighting them and using the Up and Down arrow buttons to increase

or decrease the number.

The factory default LAN settings are:

IP Address: 192.168.1.129

Gateway: 192.168.1.254

Subnet Mask: 255.255.255.0

You can save your changes and return to the Network Setup screen by highlighting OK and

pressing the

button

. Selecting Cancel exits the screen without saving the changes.