User`s manual

TVDR4 – 9 – 16H
18
The Quick Setup screen allows you to set up the most commonly used features of your DVR.
Use the arrow buttons to move through the options. Pressing the
button lets you make your
selections.
Highlight the box beside Quick Setup and press the
button to toggle between On and Off. If
you select Off, you will use the Normal Setup screen to change the DVR’s settings.
Highlight the Record Speed box and select recording speeds from as few as one image every 10
seconds to as fast as 60 ips.
Highlight the Record Quality box and select from Very High, High, Standard and Low.
Highlight the box beside Audio Recording and select either On or Off.
NOTE: It is the user’s responsibility to determine if local laws and regulations permit
recording audio.
Highlight the box beside Sequence Dwell Time and select from 3 to 60 seconds for the camera
sequence dwell time.
Selecting System Information… enters that screen.
Selecting Camera… enters a screen where you can set up camera information.
Selecting Network Setup… enters a screen where you can set up network information.
Selecting Password… enters a screen where you will be able to change passwords.
Selecting Date/Time… enters a screen where you will be able to set the DVR’s time and date.