User manual

Remote Administration System

• Add: Adds the selected site in Registered site to Target site.

• Add all: Adds all sites in Registered site to Target site.

• Remove: Removes the selected site from Target site.

• Remove all: Removes all sites from Target site.

• Sequence dwell time: Specifies the sequence dwell time for each connection.

NOTE: Auto sequencing is not valid with modem connections.

Image Adjust Button

υ Brightness/Contrast/Saturation/Hue

Adjust the brightness, contrast, saturation, and hue by clicking the target icons. Clicking the

Undo icon cancels the image processing operation and reloads the original image.

NOTE: It is important that images are properly adjusted. These adjustments cannot

make up for improperly adjusted images when the images are recorded.

NOTE: This function may not be supported, depending on the specification of the

remote DVR.

NOTE: Only the administrator can adjust the image from a remote site.

PTZ Control

υ Pan/Tilt/Zoom

Select the PTZ camera of the remote site, and control pan, tilt and zoom.

NOTE: This function may not be supported, depending on the specification of the

remote DVR.