User manual

Remote Administration System
21
Camera Buttons
…
Enable selection of the camera to display from the remote site.
Screen Mode Buttons
…
To select the screen mode, click one of the four buttons.
υ Single-screen mode
To view a specific image in the single-screen mode, move the cursor to that image and double
click the left mouse button.
υ Return to the previous screen mode
To return to the previous screen mode from the single-screen mode, double click the left
mouse button in the monitoring window.
Utility Buttons
υ Auto Connection
When this button is depressed (selected), any event detected at the remote site will result in
the auto connection to a remote monitoring location (also running the RAS software).
NOTE: The Auto Sequencing button and Setup button cannot be selected while the
auto connection is activated.
υ Auto Sequencing
When this button is depressed (selected), the RAS connects to the registered sites sequentially
allowing the connection of more than one remote site.
NOTE: The Auto Connection button and Setup button cannot be selected while the
auto sequencing is activated.
υ Setup
Runs a setup program for the RAS Watch. The Setup button is disabled when the RAS
Watch connects to the remote site. Disconnect all the current connections and then click the
Setup button to display the following Setup - Watch dialog box. Set up the Favorites and
Auto Sequencing information.