User manual

User’s Manual
14
Status Window for Remote Site
υ Event
Displays the events detected by the internal motion detector, external sensor, or text-in
transaction. The status display of event detection will continue during the preset dwell time of
the event-driven recording. The icons of each status are as follows:
Event Detection:
(Motion Detection, Sensor, Text In)
No Event Detection:
Event Off:
NOTE: Event detection for Text In may not be supported, depending on the
specification of the remote DVR.
υ Alarm Out
Displays status of the alarm-out signals.
Alarm Out:
No Alarm Out:
υ System Check
Displays the function status of the camera, alarm, and recording of the remote DVR.
The icons of each status are as follows:
Normal:
(Camera, Alarm, Recording)
Irregular:
System Check Off:
υ Record Period
Displays the record period. Brackets next to the record period information show the operating
mode of a remote DVR (Record or Playback).
NOTE: If the remote DVR is in playback mode, all icons turn to the Off mode.
υ Version
Displays hardware (first 2 digits) and software (last 2 digits) version information.