User manual

Remote Administration System

Function Buttons

υ Connect Button

Select the site you want to connect to from the Remote Site List, and then click the Connect

button to initiate connection (if required) and to display the system status of the connected

system. If you want to connect to another site, disconnect from the currently connected

system by releasing the Connect button by clicking on it.

υ Watch/Search Button /

Initiates the RAS Watch or the RAS Search programs. Select the site from the Remote Site

list, and then click the Watch or the Search button to activate the RAS Watch or the RAS

Search. The site you select will be connected directly.

NOTE: Clicking a Watch or Search button when no site is selected in the Remote Site

List only activates the program without connecting to a site.

υ Setup Button

Allows changing the programming of the remote DVR.

NOTE: Refer to the manual for each applicable remote DVR for the details of system

programming and setup.

NOTE: The Motion-Detecting Zone Setup dialog box of the remote DVR setup is as

follows.

: Activates the target area for the motion-detecting zone.

: Releases the target area from the motion-detecting zone.

: Select the block(s) for motion-detecting zone by dragging the mouse.

: Select the rectangle-shaped blocks for motion-detecting zone.

: Select all blocks for motion-detecting zone.