User manual

Remote Administration System
7
• Date/Time Format: Set the date/time format.
• Dial-up Network: Select Use modem if you want to use the internal modem or an external
modem for remote access.
• Security Options: Set up the password if password confirmation is required Before setup,
Before startup, or Before shutdown the RAS. Click the Change button to change the
password. The password can be composed of up to eight digits or alphabetic characters.
• Display Option: Set up the display acceleration.
– None: Not using the display acceleration.
– Normal: Using the display acceleration (DirectX).
– Full: Using the display acceleration (DirectX Video Memory).
NOTE: The image cannot be displayed properly, depending on the specification of
your PC. In this case, lower the level of the display option.
υ Remote Site
Configure the connection list for remote access.
• Add: Click the Add button and enter the information of the remote site to register. Enter a
site name and the IP address of the remote site (modem phone number for dial-up
connection), acquired from your network administrator. If you have entered a user ID and a
password of the remote site for remote access, the site will be connected automatically
without a dialog box asking for a password.
NOTE: Up to 32 characters may be entered for the site name and telephone number,
and eight characters entered for the password.