User`s guide

Chapter 4

Init Display First PCI Slot, AGP.

USB Keyboard Support: Support USB Keyboard under DOS status. Disabled, Enabled

IDE HDD Block Mode: . If your IDE hard drive supports block mode, select Enabled for

automatic detection of the optimal number of block read/writes per sector the drive can

support.

Enabled, Disabled.

4.6 POWER MANAGEMENT SETUP

Phoenix – AwardBIOS CMOS Setup Utility

Power Management Setup

Item Help

ACPI Function

Power Management Option

HDD Power Down

Suspend Mode

Video Off Option

Video Off Method

MODEM Use IRQ

Soft – Off by PWRBTN

PWRON After PWR-Fail

? IRQ/Event Activity Detect

[Enabled]

[User Define]

[Disabled]

[Suspend -> Off]

[V/H SYNC+Blank]

[3]

[Instant – Off]

[Off]

[Press Enter]

Menu Level ?

????:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail - Save Defaults F7: Optimized Defaults

ACPI function Enabled, Disabled.

Power Management Option:

User Define: Users can configure their own Power Management Timer.

Min Saving - defined timer values are used. All timers are in their MAX values.

Max Saving - defined timer values are used. All timers are in their MIN values.

HDD Power Down

Disabled: HDD’s motor will not be off by timer.

1 - 15 Min: Set the HDD idle time before the HDD enters power saving mode (motor off).

Suspend Mode

Disabled: The system never enters Suspend mode by timer.

1 Min ~ 1Hr: Defines the continuous idle time before the system enters Suspend mode. If any

items defined in “PM Events” are on and activated, the system will be woken up.