User's Manual

SETTING THE TEMPERATURE ALARM

Use this function to be woken up at a determined period of time earlier (1-30 minutes), if one of the

transmitter‘s temperatures is below

-1

1. In normal time mode, press ALARM key twice to enter pre-alarm mode, press UP or DOWN key

to turn pre-alarm on.

2. Press and hold the ALARM key for 2 seconds, pre-alarm time flashing, pr

ess UP or DOWN key

to change its value.

NOTE:

1. To activate pre-alarm function, ALARM must be on.

Temperature alarm ON

Pre-alarm 15 minutes Pre-alarm mode

VIEWING THE CHANNEL

The default channel is channel 1. In normal time mode, press UP key to view the channel from 1 to 3.

HOW TO READ INDOOR AND OUTDOOR TEMPERATURE & HUMIDITY RECORDS

Change the temperature unit by sliding

°C / °F slide switch to °C for Centigrade or °F for Fahrenheit.

If the readings go above or below the specified range, the receiver and transmitter will keep show the

last record within the operation range.

NOTE:

1. If no signals are received or the transmission is interfered with, “---“ appears in the display.

2. Locate the clock in other position and make sure the transmission is within the effective range of

30 meters approx.

3. After several trials but in vain, please reset the clock thoroughly. Try out where your

multifunctional alarm clock receives the signals best.

CHECKING AND DELETING MAX./MIN/ TEMPERATURE & HUMIDITY REOCRDS