User's Manual

- 13 -
6.4 WiFi (optional)
(1) This function only active on the specified models that feature
with a WLAN module.
(2) Click ON/OFF to turn on/off the
internal WLAN module function.
(3) Scan interval setting may change
the refresh network time after
network disconnected.
(4) When WLAN function is on, a
network icon will show on the tool
bar.
(5) Click network icon to open
the
WLAN management.
(6) Select
the desired network and click “Connect”. Enter the
necessary parameters as required and click “OK”.
(7) When WLAN connecting succeeds, the network icon status
on the tool bar will appear connected.