User's Manual

- 8 -
3. Battery
The battery is a precision electronic product. Please use in the
proper manner to extend its life and preserve the continuity of data
stored in the terminal.
When shipped from the factory, the battery contains a minimal
amount of power. Before using for the first time, charge the battery
fully. An icon on the terminal’s desktop displays the amount of
remaining battery power. When the battery is almost completely
drained, the system will display a message that power is nearly
depleted. If the battery cannot be recharged before completely
losing all power, data stored in the terminal could be lost. In order to
protect data on the terminal, try to charge the unit as soon as
seeing the low power warning. As the battery used is a Lithium ion
type, it can also be charged when power is moderately low without
harming the battery. The charging status of the battery can be
determined from the terminal’s LED.
Flashing red LED: battery currently being charged
Constantly lit red LED: battery is fully charged
Note:
1. Please use the specialized charger and battery for this terminal
to avoid damaging the unit.
2. If the device is not used for long periods of time, please remove
the battery.
3. Backup battery provides only necessary power to keep data in
RAM when the main battery is being replaced. (Not for any other
operation of the Terminal)
Warning:
Do not leave the Terminal with out power supply for a long time to
prevent Data loss