User's Manual

European Standard:
(1) Power Adapters (230V) x 2 (2) RCA to Scart cable x 2
USA Standard
(1) Power Adapters (120V) x 2 (2) RCA Cable x 2
1. – Channel selection switch to find optimal reception, the transmitter and
receiver must to be Configured as the same channel.
2A –Remote control LED sends IR rays, to remotely control the source AV
equipment.
2B –Remote control LED receives IR rays from remote controller.
3A – Directional 5.8GHz A/V antenna sends A/V signal from source
equipment.
3B – Directional 5.8GHz A/V antenna receives audio and video signal.
4 – Power on/off switch.
5 – DC power input, connect to power supply. (9v).
6 – IR Mouse output, to remotely control source AV equipment.
7A –Video Jack, (yellow), input from source AV equipment.
7B –Video Jack, (yellow), output to TV.
8A –Audio Jack, Right (red), input from source AV equipment.
8B –Audio Jack, Right (red), output to TV.
9A –Audio Jack, Left (white), input from source AV equipment.
9B –Audio Jack, Left (white), output to TV.
10 –Power LED.
2. Panel Control and Function
3
2