User`s guide

28 MONITOR AFx™ v3.3 LCD Keypad User's Guide
500-9030v3.3
PIN:
This allows
setting or changing
the
P
ersonal
I
D
N
umber for this user. (You'll be asked to enter
it twice--to help protect against typing errors.)
The last two digits of the PIN must be different. Also,
do
not
use consecutive numbers such as 1234.
Name:
Use the
keypad to enter the
user's name, and
select
Ok
when finished.
Tip:
Check the letters on the numeric keypad.
Then, for each letter of the name, quickly press the
specific key until the letter appears (e.g., pressing
2
yields 2, A, B, C;
0
provides 0, Z, <space>, Q, etc).
To move to the next letter-position, use the key, or
wait 2 seconds. To retype a previous letter, use the
keys, and then enter the letter as before.
Aut
:
Use the
Next
and
Prev
buttons to
select an authority
profile for the user. (Select
Ok
when finished).
This determines what doors the user can enter (and
at what time of day), and the tasks they will be able
to perform at system keypads.
Setting this as
Undfnd
will delete the user!
User authority profiles themselves are normally set
up by your service technician (service PIN needed).
System
/ Condo:
For systems with
condominium
keypads, this screen
allows accessing the
System
authority
screen (same as
Aut
, above), and the
Condo
authority screen.
Tip:
Press if you do not with to use this screen.
Use the
Next
and
Prev
buttons to select an
authority profile for the user. (Select
Ok
when
finished).
Condo Authority of "Undfnd":
This is a reserved
condo user (that can be edited by a user with condo
"Master" authority).
Condo-to-user assignments can only be set up
through the MONITOR AFx Director software.
Lang
/ Chal:
This
screen allows setting
the LCD language for
this user, and whether or not the "physically-
challenged" unlock times and door-held-open
times apply to this user.
Select
Lang
to 'toggle' the language, or
Chal
to 'toggle' the "Challenged" setting. When
finished, select
Ok
.
Watch the screen for the settings to change.
(You will remain in this same screen.)
6)
To return to the main screen (log out), press
the ( ) key a few times, or let the system
time-out (1 minute).
Deleting a User
Users can be deleted from the system when
necessary.
To allow tracking card-usage, you can alternatively
leave the user in the system, but set them to an
authority profile that provides
no
access to doors or
keypads. (See the preceding topic for more info.)
Note:
Setting the authority to "undefined" will delete
the user (equivalent to selecting
Delete
).
Steps:
1)
Log into the
keypad by
entering your user
ID and/or PIN as indicated on-screen.
2)
Press
until
"Users" appears,
& select
Users
.
3)
Enter the specific
user number (and
select
Ok
),
or
select
Ok
first, and then press
until the
desired user appears on-screen.
4)
With the desired
user on-screen,
select
Delete
.
...continues...
New PIN ----
For User 0xx
UserName . . . .
↓
OK
0xx AuthProfile
↓
Ok
↓
Next
↓
Prev
0xx UserName
↓
System
↓
Condo
0xx AuthProfile
↓
Ok
↓
Next
↓
Prev
0xx..Lng:Eng.C:N
↓
OK
↓
Lang
↓
Chal
Welcome
Enter ID: _
_
_
Menu Options
↓PIN ↓
Users
0xx Select User
↓OK
0xx UserName
↓Edit ↓
Delete
↓?