User`s guide

500-9030v3.3
Welcome Alarm Status
Admin
Reference
27
More:
Provides access to additional screens.
Name
:
Use the
keypad to enter the
user's name, and
select
Ok
when finished.
Tip:
Check the letters on the numeric keypad.
Then, for each letter of the name, quickly press the
specific key until the letter appears (e.g., pressing
2
yields 2, A, B, C;
0
provides 0, Z, <space>, Q, etc).
To move to the next letter-position, use the key, or
wait 2 seconds. To retype a previous letter, use the
keys, and then enter the letter as before.
Card
:
Enter the
version number (if
applicable), and the
access-card/token number for this user, and
select
Ok
when finished.
If card-access (entry at controlled doors) does not
apply, leave the card number as "000000000".
Version number support is typically set up by your
service technician (service PIN needed).
Firmware revisions needed for 9-digit card IDs, or
cards with version numbers: Panel firmware
V3.2
,
and door/elevator controller firmware
V1.5
.
PIN
:
This allows
setting or changing
the
P
ersonal
I
D
N
umber for this user. (You'll be asked to enter
it twice--to help protect against typing errors.)
The last two digits of the PIN must be different. Also,
do
not
use consecutive numbers such as 1234.
Lang / Chal:
This
screen allows setting
the LCD language for
this user, and whether or not the "physically-
challenged" unlock times and door-held-open
times apply to this user.
Select
Lang
to 'toggle' the language, or
Chal
to 'toggle' the "Challenged" setting. When
finished, select
Ok
.
Watch the screen for the settings to change.
(You will remain in this same screen.)
6)
To return to the main screen (log out), press
the ( ) key a few times, or let the system
time-out (1 minute).
Viewing or Changing Settings for
a User
For an existing user, you can view or edit their
settings as desired.
User (Definition): A person who can use system
keypads, and/or gain entry at access-controlled
doors.
Steps:
1)
Log into the
keypad by
entering your user
ID and/or PIN as indicated on-screen.
2)
Press
until
"Users" appears,
& select
Users
.
3)
Enter the specific
user number (and
select
Ok
),
or
select
Ok
first, and then press
until the
desired user appears on-screen.
4)
Select
Edit
.
?
: In this screen, "
?
" pertains to systems with
condominium keypads (allows viewing the user-to-
condo assignments for your selected user number).
Note:
Condo-to-user assignments can only be set
up through the MONITOR AFx Director software.
5)
Refer to the details that follow while working
with any of the listed topics:
More:
Provides access to additional screens.
Card
:
Enter the
version number (if
applicable), and the
access-card/token number for this user, and
select
Ok
when finished.
If card-access (entry at controlled doors) does not
apply, leave the card number as "000000000".
Version number support is typically set up by your
service technician (service PIN needed).
Firmware revisions needed for 9-digit card IDs, or
cards with version numbers: Panel firmware
V3.2
,
and door/elevator controller firmware
V1.5
.
. . . .
OK
0xx UserName
OK
vv_nnnnnnnnn
New PIN ----
For User 0xx
0xx..Lng:Eng.C:N
OK
Lang
Chal
Welcome
Enter ID: _
_
_
Menu Options
PIN
Users
0xx Select User
OK
0xx UserName
Edit
Delete ?
0xx UserName
OK
vv_nnnnnnnnn