User`s guide

500-9030v3.3
Welcome Alarm
Status
Admin Reference
21
Checking the Status of Sensors
(Points) and Areas
The Points-status feature allows checking the
status of sensors in the system (and viewing
the arming-level for areas).
Steps:
1)
Enter your user ID
and/or PIN to log
into the keypad.
2)
Select
access other
functions.
3)
Select
Yes
to
view Status.
4)
Select
Points.
5)
Select the desired
topic:
Pts:
Points
(sensors) in the displayed area;
Next:
Show the next area;
All:
All points regardless of area.
6)
When a
point/sensor is
displayed, you'll
have these options:
" ": Press this key to scan through the
sensors (points) in the system (or the
selected area);
Bypass / Delbyp:
Select
Bypass
to have
the system ignore the sensor
(or "
Delbyp"
to remove a "Bypass" that is in effect).
Also see
: Bypassing a faulty sensor, to follow.
" " / "
?
": " " shows the area for the point.
"
?
" jumps to the next point that is not OK.
Bypass
appears only for points that are bypassable.
To bypass a sensor, the area cannot be armed (On).
7)
If all points are
OK, you will see
an "All Secure"
message.
To return to the main screen (log out), press the ( ) key
a few times, or let the system time-out (1 minute).
Bypassing a Faulty Sensor
If the system (or a specific area) needs to be
armed with a faulty or tripped sensor, you must
bypass the specific sensor.
Steps:
1)
Enter your user ID
and/or PIN to log
into the keypad.
2)
Select
until
Bypass appears
on the display.
Then, select
Bypass
.
To bypass a sensor, the area cannot be armed (On).
You can also bypass sensors through the Points-
status screens (see the preceding topic for details).
3)
Select the desired
topic:
Pts:
Bypassable points (sensors) in the
displayed area;
Next:
Show the next area;
All:
All bypassable points in all areas.
4)
When a
point/sensor is
displayed, you'll
have these options:
" ": Press this key to scan through the
sensors (points) in the system (or the
selected area);
Bypass / Delbyp:
Select
Bypass
to have
the system ignore the sensor
(or "
Delbyp"
to remove a "Bypass" that is in effect).
" " / "
?
": " " shows the area for the point.
"
?
" jumps to the next point that is not OK.
5)
If all bypassable
points are secure,
you will see a
related message.
To return to the main screen (log out), press the ( ) key
a few times, or let the system time-out (1 minute).
Welcome
Enter ID: _
_
_
Push
Stay On
View Status?
Yes
No
View status of:
System
Points
AreaName.....Off
Pts Next All
xxx: Sensor Name
Status Bypass ?
All points in
area are secure
Welcome
Enter ID: _
_
_
Menu Options
Bypass
History
AreaName.....Off
Pts Next All
xxx: Sensor Name
Status Bypass ?
No bypassable
points insecure