User`s guide

500-9030v3.3
Welcome
Alarm
Status Admin Reference
15
Sirens
Conventional Siren
Fire Alarm: Intermittent Tone
(see previous details).
Burglar Alarm
: Steady Tone.
Voice Siren (optional)
Fire Alarm:
Steady tone, followed by
optional voice Fire Alarm Message.
(e.g. FIRE, FIRE ... Leave Immediately)
Burglar Alarm:
Intermittent tone, followed
by optional voice Burglar Alarm Message.
(e.g. Intrusion, Intrusion ... The police have
been called, leave immediately).
Dealing with Alarms (what to do if
the keypad is beeping)
If an alarm occurs, you must first decide if it is
a valid alarm (break-in, battery failure, etc.), or
a false alarm. If a valid alarm occurs, be sure
to notify the appropriate persons, and/or take
steps to either deal with the item yourself--if
appropriate, or get yourself and others out of
harm's way.
Silencing a False Alarm
An authorized user can
Cancel
a false alarm,
disarm the system and inform the monitoring
station not to dispatch the respective
emergency service.
This feature may not be available in all areas.
Consult your local security representative for more
information.
The ability to clear alarms requires "Service Test"
authority.
The following steps assume that you have
accidentally triggered a false alarm. If an
alarm has been generated, the LCD display
will show the alarm, and the keypad 'sonalert'
may also be emitting a steady tone.
Steps:
1)
Enter your user ID
and/or password
to log into the
keypad.
2)
Select
Yes
to
silence the alarm.
3)
Select
Yes
again
to verify who you
are.
4)
Enter your PIN
when prompted.
This will signal the
monitoring facility that you wish to cancel the
false alarm.
5)
To disarm
area(s), select
"
Off
".
6)
Select
Yes
to turn
all areas off.
If there was a false
alarm, the following
screen will appear.
7)
Select
Ack
to
acknowledge the
alarm and disarm
the system.
XXX: refers to the number for the monitored sensor
(input point) that was in alarm.
8)
Press this key to
perform another
function.
To return to the main screen (log out), press
the ( ) key a few times, or let the system time-
out (1 minute).
The entry tones will now stop sounding and the
selected areas are now fully disarmed.
The Verify option must be selected within 1 minute of
the false alarm being generated, for the station to
acknowledge the signal.
!! In Alarm !!
Enter ID: _
_
_
Silence System?
↓
Yes
↓No View↓
Verify User?
↓
Yes
↓No
To Verify User
Enter PIN: _
_
_
_
Push
↓Off ↓Stay
All Areas Off?
↓
Yes
↓No
Area XX
Had an Alarm
xxx: Sensor Name
Status ↓
Ack
Disarming...
↓Next Function