User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
7/48
2.1 Monitoring page
2.1.1 Status bar
The upper left corner of the monitoring page is the status bar, from left to right are
Map name/floor: The map name and floor information used by the current machine. If the map is
shared by the cloud, green brackets will be displayed behind, and the unique ID code
corresponding to the cloud map will be displayed inside. ；
Current Mode: The currently selected operation modes on the monitoring page are: correction,
punctuation, forbidden line, area, control;
Power: current machine power information and charging status will be displayed at the same
time;
Emergency and hard stop status: Emergency stop is divided into physical button hard
emergency stop and software control soft emergency stop. The two are controlled separately
and cannot be canceled each other;
Mobile status: current machine task status, the specific status is as follows
Operation bar software version: the current machine uses the software version, and the software
version will be released regularly, and it supports online upgrade. For the upgrade method,
please refer to the software upgrade ;
Chassis number: the unique identifier of the current equipment;
Mobile state