User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
6/48
White breath: charging;
White flashing: press emergency stop;
Tool use
1. Establish communication
1.1 Wireless communication-WiFi
The machine has a built-in wireless router. By viewing the WiFi list, select the name yunji_WT_xxxxx
(the last five digits represent the last five digits of the machine number), and the default password is
yunjiwater . Make sure that the current device’s wireless network card is not configured with a fixed
IP. Connect to WiFi to indicate connection success. The same machine can be connected by
multiple devices at the same time.
1.2 Wired communication-network cable
Use an Ethernet network cable to connect the reserved network port of the machine to the control
device (personal PC or upper body PAD) to ensure that the current device's wired network card is
not configured with a fixed IP. Wait for the computer to recognize it and it means the connection is
successful.
Note: For the above two connection schemes, just choose one to connect.
2. Monitoring/Mapping Tools
After establishing communication with the chassis through the above method, you can use the
browser to access:, 192.168.10.10:9001 Chrome browser is recommended. The content displayed
after the visit is as shown in the figure below
This page cannot be accessed normally when the software is restarted or shut down. You can
access it normally after the software is started or turned on.