User Manual

Manual

waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关

46/48

Internal port: mapping port, enter the port to be mapped. Such as: 9001, 31001

After conﬁguration, click the rear add button to complete the conﬁguration, and then click the

Save&Apply

button below to save the conﬁguration and take eﬀect.

After forwarding, the access port and the mapped port should be as consistent as possible.

After the conﬁguration is complete, you can create a connection with the chassis by accessing the

IP of the slave machine through the device under the master machine. The method to obtain the IP

of the slave is as follows

After logging in to the router background, select: Network->Interfaces, the IPv4 position behind the

WWAN list below shows the WiFi obtained after the current device is connected to the environment

WiFi.

Refer to the bridge environment WiFi for the method of connecting to the environment WiFi