User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
45/48
needs to use a different IP network segment from the ambient WiFi. At this time, the device
connected to the master machine can only use the local area network. Access to the chassis router
(slave), there is no way to access the devices under the slave. At this time, it is necessary to set the
port mapping function on the slave machine, so that the devices under the master machine can
directly access the devices under the slave machine through the IP on the slave machine.
Port configuration method:
After logging in to the router background, select: Network->Filewall, and set the Input, Output, and
Forward items behind the item Zones in the Name field below . Used to allow the firewall to pass the
port forwarding function. Wan accept
Select the Port Forwards button at the top of the Filewall page , and configure the mapping rules at
the bottom.
Rule information is added in New port forward, the specific configuration is as follows:
Name: The name of the rule, you can customize it
Protocol: Forwarding protocol, use the default TCP+UDP
External zone: request entry, select wan
External port: request port, enter the port to be accessed after forwarding
Internal IP address: mapping IP, select 192.168.10.10