User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
42/48
After establishing a connection with the chassis by establishing communication , you can access
192.168.10.1 or 192.168.10.9 open the router management page through a browser , as shown in
the figure below.
In addition to being used for network communication, the router also has other sensor functions
in the machine. In addition to the following functions, please do not operate or change other
functions privately!
The default password of the router management page is: robot@yunji
After entering the password, click the Login button in the lower right corner to log in.
After entering the router page, place the mouse on the upper Network menu and click the pop-up
Wirless button to enter the wireless network setting page.
The router comes with two wireless network cards, one of which (radio0 at the top of the page) is
used to transmit WiFi hotspots, and the other (radio1 at the bottom of the page) is used to bridge
WiFi. Click the Scan button behind the circled part (radio1) in the figure to scan for connectable
hotspots around.