User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
40/48
is successful, the upload is complete. If there are other prompts, you can click again to start
uploading and try again.
The corresponding map name in the location is unique. If the map name and floor are the same
but the map scene is different, the previous map will be overwritten. Therefore, it is
recommended to upload maps of different scenes in different locations, and do not upload
maps of different scenes under the same location!
2.2.4.3 Download to the machine
The window at the bottom of the page is the download function, which is used to download the map
of the service location into the robot.
Select the name of the map to be downloaded below, and click Download to download the map of
the service location to the local.
When downloading a cloud map to the local, if a local map with the same name already exists,
all data (maps, points, forbidden lines, areas, etc.) in the original map will be covered and will
not coexist. Please be careful when downloading.
3. Router
The water drop 2 product comes with a router, which can be configured for networking through the
following methods.
3.1 Connect to the network
The built-in router supports access to the network through the 4G card, and at the same time
supports the router bridge environment WiFi access to the network.