User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
4/48
When using the charging cable to manually charge, the chassis does not perform movement
tasks. After the task is issued, the task will directly fail. Pay attention to remove the hand
charging cable and put back the side cover of the machine before sending the task.
2.3 Contact charging
After the position of the charging pile is fixed, manually push the machine to the charging pile,
and make the charging contacts under the machine contact with the charging sheet on the
charging pile, then the charging can be normal.
When the map is normal and the charging pile point has been calibrated, the machine can
automatically return to the charging pile position by sending it to the charging pile point task,
and automatically recognize and recharge.