User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
36/48
The data record file will be generated when the map is created, and the data file will not be shared to
other machines through the cloud. Therefore, only the map created by the current machine and the
mapping data file can be scanned continuously. If the map is downloaded from the cloud, the map
cannot be scanned continuously!
If the current map supports continuous scanning, there will be a continuous scanning button in the
upper right corner. If there is only a rescan button, it means that the current map is not created by
this machine and cannot be continued. You need to find the machine that created the map to
continue scanning.
When the continuous scan starts, you need to correct it first. At this time, you need to ensure that
the machine is in the previously created map, and you can correct the current machine position in
the map. After that, the operation is the same as that of scanning the image. After the creation is
completed, click the button to end the image creation in the upper right corner.
The node function can also be used in the continuous map scan, but it is not allowed to delete
previously created nodes.
2.2.3.3 Map re-creation
Keep the map name and floor re-creation consistent with the re-scanning operation, and finally click
the 重新扫图 button to clear the previous map and re-create it.
The rest of the scan details are consistent with the creation of a new map.
2.2.3 Upload and download (will be obsolete)
The upload and download function can upload the local map of the machine to the cloud. If there are
multiple machines on site, it can be downloaded directly to avoid repeated scanning of the map.
When uploading and downloading, it will synchronize the location, prohibited line, area and other
information. When a scene is deployed, it can be directly uploaded to the cloud for backup, so as to
avoid other personnel's misoperation in the later period and the map is deleted or cannot be used
normally.
This function will be 服务地 点 replaced by a function later .
2.2.3.1 Upload