User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
34/48
Mode: current operating mode, optional: scanning tool, retouching tool, punctuation
Map name: The name of the currently modified map
Floor: the currently modified map floor
Download: The current map image can be downloaded to the local in png format
Retouching tools:
Straight line: Straight lines can be drawn on the map. It is only used when there are walls or
fixed obstacles that have not been swept while building the map. It is forbidden to add them
when there are no walls or fixed obstacles in the map.
Curves: Curves can be drawn in the map. It is only used when there are walls or fixed obstacles
that have not been scanned during the map creation. It is forbidden to add them at will when
there are no walls or fixed obstacles in the map.
Eraser: Used to erase some moving obstacles when creating a map, such as human bodies,
carts, cartons, sliding seats and other objects that are not fixedly placed in the venue
Adjustment tool: used to adjust the size of the eraser
Undo: You can undo the modifications made on the map, only during the current editing period.
After saving the editing and refreshing the page, it cannot be undone again.
Undo: undo the undo operation of the previous step
Bold: used to bold the black lines on the map when automatically retouching
Automatic retouching: Automatically erase unnecessary obstacles on the map, which has
certain risks. It is recommended to retouch manually
Reset: Restore the map modification to its previous appearance, only during the current
retouching period. After saving the retouching and refreshing the page, it cannot be reset.
Save: save changes
The left side of the page is a list of maps, you can quickly switch to other floors or modes.
In the middle of the page is the map of the current operation.
When retouching, you only need to use an eraser to remove temporary obstacles on the page,
and thicken some walls as needed. Do not add walls where there are no obstacles, or erase real
obstacles.
2.2.3 Create a map
2.2.3.1 Create a new map
After entering the newly created map name and floor, click the 开 始 创 建 button to start creating a
new map.