User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
33/48
2.2 Mapping tools
2.2.1 Switch map
The switch map is the created map. After the map is created, the machine needs to switch the
current map to the new map through the switch map function. Select the map name to be switched,
and click the 设 置 地 图 button after the current machine is located to switch. The software restart
operation will be performed when the map is switched, and you need to wait 30~50 seconds for the
restart to complete.
If the map that needs to be switched is the same as the current map, but the floor is different,
you can switch directly by using the floor option in the toolbar of the monitoring page to avoid
the restart link.
2.2.2 Retouching
After selecting the map and floor to be modified, click the 开 始修图 button to enter the editing page.
At the top of the page is the toolbar, from left to right:
Operating tools: