User Manual

Manual

waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关

32/48

The test tool function is only used to assist in the test. Please be careful not to conﬂict with the

task when sending the mobile task . Please make sure that the mobile test is over when you exit the

page, or you can click to end all mobile tasks.

There are

buttons in the characters under the yellow background above , which can cancel all

moving tasks.

The current task status, target point, current ﬂoor, number of retries, soft and hard emergency stop

status information are displayed in the intermediate movement status.

In the movement test below, click the selection box behind the set point to select the point to be

moved. You can click multiple times to select multiple points to move, and the order of the points is

executed in the order of selection. After selecting a point, enter the number of cycles below, and

then click Start to execute it will move sequentially according to the point list until it reaches the

speciﬁed number of laps and stops. During this period, you can 取消移动 cancel the task by pressing

the button above .

The task log only records the tasks sent in this page and the movement records performed by the

machine.