User Manual

Manual
waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关
29/48
parameter
name
Description
Take the
elevator
number
After the elevator is deployed normally, this item will be displayed after the
elevator point is calibrated on the map. The machine can take the elevator
normally only after selecting the elevator that the machine will take in the later
stage.
Emergency
stop
deceleration
When an emergency stop is triggered, the time from the moving state to the
stopping state of the machine is calculated based on the negative acceleration.
The larger the value, the shorter the braking distance and the faster the stop.
This function has an exception and has been abandoned!
After the above parameters are modified, you need to click the save button below, and then
restart the software to take effect.
2.1.3.8 Sensor status
2.1.3.8.1 Power status