User Manual

Manual

waterdocs.pages.yunjichina.com.cn/user_manual/exports/⽔滴2使⽤说明V0.9.6.html#11-电源总开关

27/48

In the conﬁguration management page, you can conﬁgure the parameters of the machine. The

conﬁgurable parameters and descriptions are as follows:

parameter

name

Description

Location

sharing

When there are more than two machines in the same venue, the location sharing

function must be turned on, and multiple machines will synchronize their

positions to each other. The location sharing function requires the use of the

same cloud sharing map between diﬀerent machines, that is, the ID after the

map name in the monitoring page is consistent.

Default: oﬀ

Human

body

recognition

Calculate the human body around the current machine through algorithms, and

make evasive actions while moving. It can eﬀectively prevent pressing people's

feet, but it will aﬀect the passing performance in a small environment.

This

function has a certain probability of misrecognition. It is not recommended to

say hello as a recognizer or rely too much on this function to avoid obstacles

with low obstacles. Default: oﬀ

Tolerance to

point

position

When the target position is occupied or other reasons cause it to reach the

vicinity of the target point but cannot accurately stop, the task is considered

successful if the robot moves within this distance of the target. Setting this

parameter to a small hour can improve the accuracy of the arrival point position,

but correspondingly will reduce the eﬃciency of the arrival point.

Default: 0.3m